VEVOR 3/4" Air Impact Wrench — 1,870 ft-lbs, Twin Hammer, 6000 RPM

The 1/2" drive covers most automotive work, but heavy truck hardware, seized axle nuts, and large suspension fasteners push past what it can deliver. Once you're fighting a rusted 1-1/4" axle nut that hasn't moved in a decade, a 1/2" drive either spins out on the fastener or you're on a breaker bar with a cheater pipe. That's the wrong tool, not a bad technique.

The VEVOR 3/4" Air Impact Wrench hits 1,870 ft-lbs of loosening torque and 1,530 ft-lb of working torque through a twin hammer mechanism — enough to break loose seized axle hardware and heavy truck fasteners without reaching for a cheater bar.

Specs

• Drive: 3/4" square
• Max loosening torque: 1,870 ft-lbs
• Working torque: 1,530 ft-lbs
• Peak torque: 1,700 ft-lbs
• Free speed: 6,000 RPM
• Air consumption: 9.5 CFM
• Operating pressure: 90–120 PSI
• Air inlet: 3/8" ID
• Mechanism: Twin hammer
• Controls: 3-position forward/reverse + power regulator
• Material: Composite housing with dual rubber handles
• Weight: 6.7 lbs (3.0 kg)
• Length: 8.1 in (206 mm)

Good for

• Seized axle nuts and large lug hardware on trucks and heavy SUVs
• Heavy suspension work — control arms, ball joints, large knuckle bolts in the 300+ ft-lb range
• Commercial and fleet maintenance where 1/2" drive can't produce enough torque
• Shops already running a 3/4" drive socket set needing a matching air wrench

Not for

• Everyday passenger car work — a 1/2" drive handles that range, at lower cost and less weight
• Small compressors — 9.5 CFM sustained requires at minimum a 20-gallon tank or 5+ HP motor for continuous use
• Final torque — use a calibrated torque wrench to reach spec after seating fasteners

1,870 ft-lbs loosening torque, twin hammer, 6.7 lbs. $133 — ships from the US warehouse.