VEVOR 3/8" Click Torque Wrench — 10–80 ft-lbs, Dual-Direction, Cr-V

Sensor bolts, oxygen sensor threads, spark plugs, small brake caliper hardware — these fasteners live in the 15–60 ft-lb range. That's below what a 1/2" torque wrench is calibrated for at the bottom of its range, where ±3% tolerance on a 25–250 ft-lb wrench is a much wider band than it sounds. A 3/8" drive torque wrench is the right tool for this work: smaller drive for tighter access, range calibrated to what you're actually tightening, and accurate throughout the full scale.

The VEVOR 3/8" Click Torque Wrench covers 10–80 ft-lbs (14–110 Nm) in both directions with ±3% accuracy, a 72-tooth reversible ratchet head, and dual-range laser-engraved scales in Cr-V steel. Adapters, an extension rod, and a storage case are included.

Specs

• Drive: 3/8"
• Torque range: 10–80 ft-lbs (14–110 Nm)
• Accuracy: ±3% (clockwise and counterclockwise)
• Ratchet: 72-tooth, reversible
• Direction: Dual — forward and reverse
• Material: Chrome vanadium (Cr-V), chrome-plated finish
• Scale: Dual-range laser-engraved (ft-lb and Nm)
• Length: 16.4 in (41.7 cm)
• Weight: 3.9 lbs (1.76 kg)
• Includes: Drive adapters (1/4" and 1/2" compatible), extension rod, storage case
• Package dimensions: 21.9 × 4.9 × 3 in (55.5 × 12.5 × 7.5 cm)

Good for

• Sensor and plug torque — O2 sensors, spark plugs, drain plugs: all in the 15–30 ft-lb range where a 3/8" wrench is precise
• Brake hardware — caliper bolts, rotor screws, and small suspension fasteners where 1/2" drive is physically awkward
• Wheel bearing retaining nuts on smaller vehicles and anything else in the 10–80 ft-lb window
• A 3/8" socket set you're already running — no reducer needed for most tasks in this range

Not for

• Lug nuts and heavy axle hardware — those require 80–150+ ft-lbs, which is past this wrench's upper limit.
  → VEVOR 1/2" Torque Wrench — 10–150 ft-lbs
• High-cycle professional shop work — budget-tier accuracy, not a calibrated workshop standard
• Replacing a torque angle gauge for stretch-bolt applications — those require angle method, not click torque

3/8" drive, 10–80 ft-lbs, ±3%, dual-direction, 3.9 lbs. Ships from the US warehouse.