VEVOR Magnetic Drill 1550W — 2" Bore, 13,000N, 11-Piece HSS Cutter Kit

Drilling holes in structural steel with a twist bit and a drill press is slow, overheats bits, and doesn't work on assembled structures you can't move. A magnetic drill solves all three problems: it mounts directly to the workpiece, cuts a clean full-diameter hole in one pass with an annular cutter, and doesn't need a separate fixture. Fabricators use them for beam connections, pipe flanges, gusset plates, and anything bolted together in the field.

The VEVOR 1550W Magnetic Drill presses 13,000N (2,922 lbf) of holding force through an electromagnet base, runs a 1550W copper-wound motor at up to 500 RPM through 10 adjustable speed stages, and comes with 11 HSS annular cutters covering 12–27mm. Weldon 3/4" shank. Works upright, horizontal, or inverted on steel plate 10mm or thicker.

What's in the kit:

• Motor: 1550W copper, 0–500 RPM variable, 10-speed
• Magnetic holding force: 13,000 N (2,922 lbf)
• Max annular cutter bore: 2 in / 50mm diameter, 2 in / 50mm depth
• Max twist drill bore: 0.6 in / 16mm diameter, 3.9 in / 100mm depth
• Max travel distance: 8.3 in / 210mm
• Cutter shank: Weldon 3/4"
• Crank handles: 3 × rubber-coated, non-slip
• Coolant system: stainless steel pot, push-fit tube connection
• Unit dimensions: 12.6 × 5.5 × 16.9 in (320 × 140 × 430 mm)
• Net weight: 41.9 lbs (19 kg)
• Voltage: 120V / 60Hz (US)
• Model: D8860
• Included bits (HSS annular, 26mm depth, Weldon shank): 12, 13, 15, 16, 18, 20, 21, 23, 24, 26, 27mm
• Also includes: 2 pilot pins, twist drill chuck, stainless steel coolant pot, user manual

Good for:

• Steel fabrication: drilling bolt holes in beam flanges, angle iron, and plate
• Field work on assembled structures — mounts to the workpiece, no press required
• Pipe flange and gusset drilling where positioning a drill press isn't an option
• Shipbuilding, equipment installation, bridge and rail work

Not for:

• Non-ferrous material — the electromagnet base needs steel or iron at least 10mm thick to hold
• Holes larger than 2 in / 50mm diameter — that's the cutoff for the annular mode
• Light-duty DIY use — at 41.9 lbs, this is a production tool, not a weekend drill

1550W copper motor, 13,000N magnetic base, 11 HSS annular cutters, $341.96. If you're drilling steel and need a clean hole fast, this is the setup.