VEVOR 1/2" Drive Impact Socket Set — 19-Piece Deep SAE (3/8"–1-1/2"), 6-Point Cr-V

Some jobs stall because a standard socket can't reach the fastener. Wheel lug nuts buried behind hub faces, exhaust manifold studs buried in their bosses, suspension link bolts with too much thread showing — that's what deep sockets are for. This VEVOR 19-piece set covers the full SAE range from 3/8" to 1-1/2" on a 1/2" drive, so you're not stopping mid-job to borrow a socket or make a hardware store run.

What's in the set (19 SAE sizes):

• 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"
• 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16"
• 1-3/8", 1-7/16", 1-1/2"

Good for:

• Wheel lug nuts on trucks, pickups, and SUVs — especially where the stud length leaves the nut recessed
• Exhaust manifold studs and flanged nuts that sit deep in their bosses
• Suspension link bolts, control arm hardware, and sway bar end links with long bolt shanks
• Brake caliper bracket bolts on most domestic and import platforms

Not for:

• Metric fasteners — this is SAE only. If you need metric, look at a separate set.
• Fine-thread torque-sensitive applications (head bolts, rod bolts, wheel bearings) — those jobs need a calibrated torque wrench, not just a socket

Made from 40CR chrome vanadium alloy. 6-point design contacts the flat faces of the fastener, not the corners — important when you're running an impact on a stuck lug nut. Sizes are laser-etched on each socket. Comes with a plastic storage cage that holds each piece in a labeled slot.

At $60, this is the set you use hard without worrying about it. Keep your expensive Snap-On sockets on a shadow board; take these to the dirty jobs.