VEVOR 71-Piece Air Tool Kit — 1/2" Impact Wrench, 3/8" Ratchet, Die Grinder & Air Hammer

Going pneumatic used to mean buying a bunch of separate tools — an impact wrench here, a die grinder there, a ratchet when you finally got tired of fighting with a breaker bar in tight spots. The air hammer was always "next purchase." You'd spend $400 piecing it together, and it still wouldn't include fittings, sockets, or grinding stones.

The VEVOR 71-Piece Air Tool Kit skips that math. Four pneumatic tools — 1/2" impact wrench, 3/8" ratchet, 1/2" die grinder, and air hammer — plus 67 accessories, in one blow-molded case for under $210.

What's in the Kit

• 1/2" Air Impact Wrench: 230 ft-lbs torque, 7,000 RPM, aluminum body with rubber overmold scuff guard
• 3/8" Air Ratchet Wrench: 45 ft-lbs, 150 RPM — tight-space fastening without the knuckle-busting
• 1/2" Air Die Grinder: 22,000 RPM, 1/4" collet, sealed ball bearing construction
• Air Hammer: 4,500 BPM, round shank, 3 chisels included
• Blow Gun with inflation needles and blow nozzles
• 8 impact sockets (1/2" drive, Cr-V steel)
• 9 screwdriver bits — Phillips and flat mixed set
• 10 grinding stones and sanding discs
• Hose fittings, couplers, and adapters
• Hard blow-molded carrying case: 18.31 × 11.61 × 4.13 in
• Operating pressure: 90 PSI

Good For

• Tire rotations and brake jobs — the impact wrench handles lug nuts and caliper bolts; the ratchet gets into tight spaces where the impact won't fit
• Engine bay work where you're switching tools constantly — ratchet for close-quarters fasteners, impact for stubborn hardware
• Weld cleanup, deburring, port grinding — the die grinder at 22,000 RPM is the right tool for that work
• Stuck studs, sheet metal forming, chisel work — the air hammer does what heat and a hand chisel can't
• First time going pneumatic — one purchase covers the core tools instead of building the set over two years

Not For

• Small compressors — you need a tank-style unit that can sustain 90 PSI and around 5 CFM; a pancake compressor won't keep up with the impact wrench under load
• Heavy commercial torque demands — 230 ft-lbs is solid for passenger cars and light trucks; pulling axle nuts on a 3/4-ton truck or heavy equipment needs a higher-torque wrench
• Fleet shop daily production use — these are prosumer-grade tools, not built for eight hours a day five days a week

Four air tools, 67 accessories, one case. At $200.91, it's the shortest path from zero pneumatic tools to a functional shop — no coupon required.